• Email info@aschome.com

      TOLL-FREE (888) 833-4ASC

    • PHONE (818) 833-0088

      FAX (818) 833-0080

  • Choose country
    of origin:

Available Options
 
Power voltage Selector

PW - Power, voltage, frequency selection

Although the standard Econoclave autoclave is designed for 480 volt / 3phase service and 24 volt control power, we can design it to accommodate any international voltage and frequency requirement.

Click to expand and learn more
 
 
 
 
Vacuum Pump

VP - Vacuum pumps

While some customers prefer to use in-house vacuum systems to supply vacuum to the Econoclave, most prefer that a dedicated pump or pumps be provided on the Econoclave skid.

Click to expand and learn more
 
 
 
 
Chilled Resin Vacuum Traps

VT - VacTrap ™ chilled resin traps

For composite curing applications with high volatile content (ie. high-temperature polyimides), we recommend chilled VacTrap ™ assemblies instead of the conventional ambient temperature filter traps. The VacTrap will be much more effective condensing volatiles and solvents during high-temperature curing operations.

Click to expand and learn more
 
 
 
 
Controlled Vacuum System

VR - Controlled vacuum receiver system

Many composite applications require full vacuum during and or at the beginning of the cure cycle. In these cases, there is little need to control the level of the vacuum to the parts. However, for high-temperature polyimids and honeycomb reinforced parts, there is often the need to provide partial vacuum (ie. -10"Hg) to the parts. In these cases you will need to have a controlled vacuum receiver.

Click to expand and learn more
 
 
 
 
Purge System Option

PG - Purge system with oxygen monitoring

Most composite autoclaves utilize nitrogen as the pressurization media. After a cure cycle, there is a need to purge the nitrogen from the autoclave and bring in fresh breathable air prior to allowing personnel to enter the autoclave.

Click to expand and learn more