Econoclave® model

Econoclave® EC6X12

Name: Econoclave® EC6X12 autoclave
Brand: Econoclave

A composite curing and bonding autoclave with a 72” (1828 mm) working diameter and 144” (3657 mm) working length, factory tested with CPC controls.

Explore the components

72”Working diameter (1828 mm)

144”Working length (3657 mm)

150 psigMaximum working pressure

450 °FMaximum working temperature

Need higher pressure or temperature? ASC can configure a non-standard model.

Technical specifications

EC6X12-150P550F

Interior dimensions
Working diameter (excluding floor)	72” (1828 mm)
Working length (front of floor to rear H-Slot panel)	144” (3657 mm)
Floor to ceiling	58” (1473 mm)
Shop floor to autoclave floor	28” (711 mm)
Exterior dimensions (with integrated skid)
Overall width with the door closed	114 5/8” (2608 mm)
Overall width with the door open	150” (3302 mm)
Overall length with the door closed	297” (7544 mm)
Overall length with the door open	360” (9154 mm)
Overall height	86” (2479 mm)
Temperature capability
Maximum interior working temperature	450 °F (232 °C)
Maximum heating rate (average air)	10 °F/min (5.5 °C/min)
Maximum cooling rate (average air)	10 °F/min (5.5 °C/min)
Thermal load during the test	3,000 lbs (1360 kg) steel
Temperature uniformity at steady state	+/- 5 °F (+/- 2.8 °C)
External shell temperature at a maximum temperature	<140° (60 °C)
Pressure capability
Maximum normal working pressure	150 psig (10.3 bar)
Maximum vessel design pressure (MAWP)	165 psig (11.3 bar)
Maximum pressurization rate (average)	10 psi/min (0.69 bar/min)
Maximum depressurization rate (average)	10 psi/min (0.69 bar/min)
Vessel
Pressure vessel fabrication	ASME or option PED, carbon steel
Door closure	Quick-opening, Hydraulic
Interior
Internal insulation	4” ceramic fiber
Sheet metal	18 GA Aluminized steel
Sheet metal retention	Screw-less capture system
Rail type and max loading	Inverted angle, 4000 lbs (682 kg) on 4 wheels
Floor loading	500 lbs (227 kg)
Air circulation system
Fan motor	30HP (22.3kw)
Air velocity	250 ft/min (76 m/min)
H-Slot® flow adjustment system	Front and Rear
Heating system
Heater	Electric, 136 KW, 1 bank, Inconel sheathed
Heating control	Proportional SSR with backup contactor
Cooling system
Cooling coil	Multi-row 5/8” finned tubing, stainless-steel
Main cooling valve	1” (25mm), solenoid-actuated
Trim and air valves	½” (12mm), solenoid-actuated
Coil drain system	Air-assisted coil purge
Pressurization system
Pressure transducer	0-200 psig, ¼% FS accuracy
Pressure gauge	At the door, 4-½” dial, 0-200 psig, ¼% accuracy
Inlet valve	1” (25mm), electro-pneumatic
Exhaust valve	1” (12mm), electro-pneumatic
Silencer	Yes
Manual exhaust valve	½”
Vacuum
Vacuum source line quantity	6
Vacuum source line size	½” npt
Computer-controlled valves on each line	VAC and VENT
Resin filter trap	Yes
Vacuum probe line quantity	6
Vacuum probe line size	¼" npt
Thermocouples
Thermocouple type	J or K
Air temperature thermocouples	1
Part temperature thermocouples	12
Hi-Limit safety thermocouple	1
Control system
Primary controller	Industrial PC
Control software	CPC - Composite Processing Control
PLC and control hardware	Allen Bradley CompactLogix
Electrical enclosures	One, Nema-12, housing control and power
PC enclosure	None. PC on a customer provided shelf.
Power system
Primary power	480V / 3PH / 60Hz
Control power	120V / 1PH / 60Hz
Full load amps	120A
Weight
Approximate shipping weight	23,000 lbs. or 10,432 kg

Exterior dimensions are approximate and include the integrated skid and closed-loop cooling system.
Heating and cooling rates are average air-temperature rates at maximum pressure with the rated thermal load.
The vessel is rated 15 psi above the normal maximum working pressure so the relief valve is not triggered in normal operation.
Boeing autoclave certification D6-49327 requires at least 9 part thermocouples.
Vacuum and thermocouple quantities can be changed, and any of the world's power requirements can be accommodated.

Included

Standard on every Econoclave

Each model ships with its controls, power, vacuum, and auxiliaries plumbed, wired, and tested at our factory, so installation and startup are quick.

Available options

ASME Section VIII, Division 1 pressure vessel
Quick-opening door with ASC's forged three-piece locking ring and redundant safety interlocks
CPC control system
Front and rear H-Slot® flow adjustment for uniform temperature
High-capacity circulation fan for high air speed and fast heat transfer
Modular heater with sheathed Inconel elements
Internal stainless-steel cooling exchanger
Stainless control valves with proportional actuation
PC-controlled vacuum source lines with resin traps, probe lines, and transducers
Stainless-steel tubing throughout
Fastener-free internal sheet metal that eliminates FOD risk
Skid-mounted controls, power, vacuum, and optional cooling tank, fully factory tested

Compare