Econoclave® model

Econoclave® EC2X4

Name: Econoclave® EC2X4 autoclave
Brand: Econoclave

A composite curing and bonding autoclave with a 24” (610 mm) working diameter and 48” (1219 mm) working length, factory tested with CPC controls.

Explore the components

24”Working diameter (610 mm)

48”Working length (1219 mm)

150 or 200 psigMaximum working pressure

450 or 800 °FMaximum working temperature

Need higher pressure or temperature? ASC can configure a non-standard model.

Technical specifications

EC2X4 models

Specification	EC2X4-150P550F	EC2X4-200P800F
Interior dimensions
Working diameter (excluding floor)	24” (610mm)	24” (610mm)
Working length (front of floor to rear H-Slot panel)	48” (1219mm)	48” (1219mm)
Floor to ceiling	17 ¼" (438 mm)	17 ¼" (438 mm)
Shop floor to autoclave floor	43” (1092mm)	43” (1092mm)
Exterior dimensions (with integrated skid)
Overall width with the door closed	80” (2032mm)	80” (2032mm)
Overall width with the door open	90” (2286mm)	90” (2286mm)
Overall length with the door closed	120” (3048mm)	120” (3048mm)
Overall length with the door open	150” (3810mm)	150” (3810mm)
Overall height	75” (1905mm)	75” (1905mm)
Temperature capability
Maximum interior working temperature	450 °F (232 °C)	800 °F (428 °C)
Maximum heating rate (average air)	5 °F/min (2.7 °C/min)	10 °F/min (5.5 °C/min)
Maximum cooling rate (average air)	5 °F/min (2.7 °C/min)	10 °F/min (5.5 °C/min)
Thermal load during the test	50 lbs (22.7 kg) steel	50 lbs (22.7 kg) steel
Temperature uniformity at steady state	+/- 5 °F (+/- 2.8 ?C)	+/- 5 ?F (+/- 2.8 ?C)
External shell temperature at a maximum temperature	<140 °F(60 °C)	<140 °F(60 °C)
Pressure capability
Maximum normal working pressure	150 psig (10.3 bar)	200 psig (13.8 bar)
Maximum vessel design pressure (MAWP)	165 psig (11.3 bar)	215 psig (14.8 bar)
Maximum pressurization rate (average)	5 psi/min (0.34 bar/min)	5 psi/min (0.34 bar/min)
Maximum depressurization rate (average)	5 psi/min (0.34 bar/min)	5 psi/min (0.34 bar/min)
Vessel
Pressure vessel fabrication	ASME or option PED, carbon steel	ASME or option PED, carbon steel
Door closure	Quick-opening, manual	Quick-opening, manual
Interior
Internal insulation	4” (100 mm) ceramic fiber	6” (100 mm) ceramic fiber
Sheet metal	18 GA Aluminized steel	18 GA Aluminized steel
Sheet metal retention	Screw-less capture system	Screw-less capture system
Rail type and max loading	None. Flat floor.	None. Flat floor.
Floor loading	100 lbs (45.3kg)	100 lbs (45.3kg)
Air circulation system
Fan motor	10HP (7.5kw)	10HP (7.5kw)
Air velocity	250 ft/min (76 m/min)	250 ft/min (76 m/min)
H-Slot® flow adjustment system	Front and Rear	Front and Rear
Heating system
Heater	Electric, 6 KW, 1 bank, Inconel sheathed	Electric, 7 KW, 1 bank, Inconel sheathed
Heating control	Proportional SSR with backup contactor	Proportional SSR with backup contactor
Cooling system
Cooling coil	Multi-row 5/8” finned tubing, stainless-steel	Multi-row 5/8” finned tubing, stainless-steel
Main cooling valve	½” (25mm), solenoid controlled	½” (25mm), proportional actuating
Trim and air valves	½” (12mm), solenoid controlled	½” (12mm), solenoid controlled
Coil drain system	Air-assisted coil purge	Air-assisted coil purge
Pressurization system
Pressure transducer	0-200 psig, ¼% FS accuracy	0-200 psig, ¼% FS accuracy
Pressure gauge	At the door, 4-1/2” dial, 0-200 psig, ¼% accuracy	At the door, 4-1/2” dial, 0-200 psig, ¼% accuracy
Inlet valve	½” (25mm), electro-pneumatic	½” (25mm), proportional actuating
Exhaust valve	½” (12mm), electro-pneumatic	½” (12mm), proportional actuating
Silencer	Yes	Yes
Manual exhaust valve	½”	½”
Vacuum
Vacuum source line quantity	2	2
Vacuum source line size	½” npt	½” npt
Computer-controlled valves on each line	VAC and VENT	VAC and VENT
Resin filter trap	Yes	Yes
Vacuum probe line quantity	2	2
Vacuum probe line size	¼” npt	¼” npt
Thermocouples
Thermocouple type	J or K	J or K
Air temperature thermocouples	1	1
Part temperature thermocouples	4	4
Hi-Limit safety thermocouple	1	1
Control system
Primary controller	Industrial PC	Industrial PC
Control software	CPC - Composite Processing Control	CPC - Composite Processing Control
PLC and control hardware	Allen Bradley CompactLogix	Allen Bradley CompactLogix
Electrical enclosures	One, Nema-12, housing control and power	One, Nema-12, housing control and power
PC enclosure	None. PC on the integrated shelf	None. PC on the integrated shelf
Power system
Primary power	480V / 3PH / 60Hz	480V / 3PH / 60Hz
Control power	120V / 1PH / 60Hz	120V / 1PH / 60Hz
Full load amps	39A	39A

Exterior dimensions are approximate and include the integrated skid and closed-loop cooling system.
Heating and cooling rates are average air-temperature rates at maximum pressure with the rated thermal load.
The vessel is rated 15 psi above the normal maximum working pressure so the relief valve is not triggered in normal operation.
Boeing autoclave certification D6-49327 requires at least 9 part thermocouples.
Vacuum and thermocouple quantities can be changed, and any of the world's power requirements can be accommodated.

Included

Standard on every Econoclave

Each model ships with its controls, power, vacuum, and auxiliaries plumbed, wired, and tested at our factory, so installation and startup are quick.

Available options

ASME Section VIII, Division 1 pressure vessel
Quick-opening door with ASC's forged three-piece locking ring and redundant safety interlocks
CPC control system
Front and rear H-Slot® flow adjustment for uniform temperature
High-capacity circulation fan for high air speed and fast heat transfer
Modular heater with sheathed Inconel elements
Internal stainless-steel cooling exchanger
Stainless control valves with proportional actuation
PC-controlled vacuum source lines with resin traps, probe lines, and transducers
Stainless-steel tubing throughout
Fastener-free internal sheet metal that eliminates FOD risk
Skid-mounted controls, power, vacuum, and optional cooling tank, fully factory tested

Compare